SPEEDTEMP DUO™ DX
DIRECT-EXCHANGE HEATER / CHILLER

Tanktemp Duo-DX tube-in-tube direct heat exchange heater and chiller Tanktemp Duo-DX tube-in-tube direct heat exchanger Tanktemp Duo-DX setup in use Tanktemp Duo-DX setup in use

UNIT PRICES:

DUO-DX51/53 5-HORSEPOWER 1- OR 3-PHASE 60,000BTU $15,990
Custom options (480V) and sizes (up to 25-horsepower) available

DIMENSIONS:

Length 64” - Width 36” - Height 52”
Inlet/outlet 1”

ABOUT THE DUO™ DX SERIES:

The SPEEDTEMP DUO™ DX DIRECT-EXCHANGE HEATER/CHILLER HCDX series are our direct-exchange Liquid Heat Pump™ combination heating/chilling units. Allowing you to heat OR chill with one device, and delivering up to 60,000BTU with the 5-horsepower model and up to 300,000BTU with the 25-horsepower model, these units easily meet the high-volume demands of your winery.

Our exclusive system is the only direct-exchange plus Liquid Heat Pump™ combination heater/chiller on the market. The stainless steel coaxial heat exchanger is fast and efficient. Wine, juice or must is pumped directly through the exchanger, totally eliminating the loss of efficiency typical of transferring heat to and from glycol. Driving the unit is our Liquid Heat Pump™, which is more than twice as fast and approximately four times time more efficient than conventional solutions.





SPEEDTEMP DUO™ DX
DIRECT-EXCHANGE LIQUID HEAT PUMP™ HEATER/CHILLER FEATURES:

• Exclusive stainless steel coaxial direct-exchange coil - Exclusive high-efficiency direct-exchange heat coil for super-efficient heating OR chilling with one device - We eliminated the source of efficiency loss, the glycol, and created the most efficient and effective combination heating/chilling solution in the world - Yes, zero glycol; our innovative direct-exchange method is fast and efficient - wine or liquid is pumped directly through the direct-exchange coil, totally eliminating the loss of efficiency typical of transferring heat into and out of glycol - We exchange more thermal energy, more rapidly, than anyone else

• Exclusive Liquid Heat Pump™ - More than twice as fast and approximately four times time more efficient than conventional solutions - The only Liquid Heat Pump™ combination heater/chiller out there

• Rapid cold-soaking or heating plus accurate temperature maintenance - Start and stop fermentation faster than any other solution - Heating for inoculation - Rapid heat prior to bottling

• Dual fans - Faster, more effective heat transfer

• Dual Ranco™ switched thermostats to control tank temperature - One for heat, one for cool - For ease of use, ease of access and simplicity in operation

• Ranco™ dual pressure switch - Protects the compressor

• ALL-STAINLESS CONSTRUCTION

• Fully portable, mounted on heavy-duty casters, and includes a 25-foot electrical cord - Maximize available floorspace by minimizing square footage dedicated to non-portable equipment - Reconfigure your setup quickly and easily

• Solid copper tubing in refrigeration system - Guarantees years of trouble-free service

• 1” stainless steel sanitary NPT inlet and outlet

• Fully factory-tested for 24 hours before delivery
Two-year warranty on all parts and labor   [details]
Additional three-year parts-at-cost warranty   [details]

YES, IT REALLY IS THAT GOOD

Don’t let the ridiculously rugged construction fool you; this is a precision instrument for rapid heat exchange with incredible energy efficiency. We operate at an average 3.8 coefficiency of performance (COP) factor, meaning we are approximately four times more efficient than a traditional heating system – you read that right: we operate at about ¼th the cost of other heaters, adding profit right to your bottom line. This is the most versatile and powerful tool in your arsenal.

ALWAYS OVER-BUILT. NEVER OVER-ENGINEERED.

CALL US TODAY to find out what the SPEEDTEMP DUO™ DX
DIRECT-EXCHANGE HEATER/CHILLER series can do for you.

[Downloadable data sheet here]